Working Process Of Plastic To Oil

Working Process Of Plastic To Oil

Working process of Waste Oil Refining Plant:

First, pump the waste oil into reactor by oil pump.

Second, use coal/wood/natural gas/fuel oil/electricity heating the reactor.

Third, after heating some time, the liquid oil will become oil gas, oil gas will be liquefied together with cooling pipe and condensers then could go into oil tank. Ideas get mixed oil, a person can also call it fuel oils. If you want get diesel and gasoline separately, through temperature control could separate it and collected into two different oil tanks.

Fourth, some gases (syngas) like Methane, Ethane, Propane, Butane, and Hydrogen can't liquefied under normal pressure and normal temperature in order to be recycled to fireside furnace heating the reactor.

Fifth, when use burning material heating the reactor, will produce some fire. These smokes will go into our de-dusting system, the inside we design some ruthless nozzles, these nozzles will spraying some chemical water, the dust will be absorbed by the chemical water and flowing into the de-dusting pool area. In the pool we will put some chemical may remove the sulfur.

Sixth, the exhaust gas will access the chimney sucked by draft fan, when emission the exhaust gas will become steam, no pollution.

Remove the color and smell:

After Waste Oil Refining Plant distillation peocess, the oil we getted is mixed oil, use as fuel oil no problem, if well-developed better oil quality, then will need these below parts, dump the rotting matter color and smell.

For this process, the main technology is chemical.

Our Waste Oil Refining Plant has lot's of advantages:

1> Security: our equipments have anti-blocking device at the same time pressure gauges,alarms,safety valves and vacuum host.

2> Energy conservation: recycling of exhaust gas and science fire channel design can save energy and thereby reducing costs.

3> Long life: hot-blast stove is long life, but not energy-saving, its consumption of one's energy is much greater style over the repair costs of heater.direct fired reactor is energy saving but short life. Might be a contradiction.we resolved this conflict by thickening steel plate reactor of fire approach part which oxidized extremely,so we generally make use of the 14mm, 16mm, 18mm, 20mm thickness of steel plate, or 12mm stainless steel plate, other slow oxidation parts use 12mm thickness plate(20G),not only energy, but long lifestyle.

4> High degree of automation: the development device, with a small forklift,conveyor and automatic feeder.

5> Guarantee with after sales service:we has Christian background, love could be the heart personal culture. Selling devices not for selling only, but to assist approach to success. Quality and service is our commitment and responsibilities. Your success is our exercising. We have some sort of reputation in the industry.

6>Low cost: all expenditure is low because of being located at suburbia.advanced and complete processing equipment, almost no external processing and customer interests oriented business philosophy, it is hardly rocket science that the price is budget friendly.

If you have any type of questions pertaining to where and ways to make use of plastic to fuel, you can contact us at our web-site.